Codelocks CL5020 Mortice Latch with Double Cylinder - Manual (Page 2)

• Drill bits 5010
10 ( 3 /
8
”) & 25mm (1”)
• Drill bits 5020
10 ( 3 /
8
”), 12 ( 15 /
32
”), 16 ( 5 /
8
”) & 20mm ( 25 /
32
”)
Box Contents
Check the contents of the box are
correct according to the model
To
ol
s
R
eq
ui
re
d
• Philips screwdriver
• Stanley knife
• Adhesive tape, pencil,
bradawl, tape measure
5
O
O
O
2
5010 5010BB 5020
1 Front Plate 3 x2 3
2 Back Plate 3 - 3
3 Back to Back Fixing Plates - 3 -
4 Lever Handles 3 3 3
5 Gaskets (x2) 3 3 3
6 Sprung Spindle 3 3 -
7 Sprung Spindles (x3) – 15/26/60mm ( 1 / 2 ”/ 11 / 32 ”/ 2 3 /
8
”) - - 3
8 1.5v AA Batteries (x4), (5010BB 8 x 1.5v AAA)
3 3 3
9 Mortice Latch, Strike and 4 Screws 3 3 -
10 Fixing Bolts (Inc spare) x4 x4 x4
11 Cable Tube and Ring Nut 3 - -
12 Alignment Insert 3 - -
13 Latch Support Post 3 3 -
14 Allen Keys 3 3 3
15 Cable Connections for REM1 and REM2 3 3 3
16 Front Plate Cylinder Keys 3 3 3
17 Front Plate Cylinder Cover 3 3 3
18 Data Transfer Cable (optional) 3 - -
19 USB Connector (optional) 3 - -
20 USB Stick (optional) 3 - -
21 PCB for Audit Trail (optional) 3 - -
22 Classroom Function Tailpiece 3 3 3
23 Mortice Lock & Cylinder - - 3
This box should also contain an Installation Template and Programming and Operating Instructions.
• Power drill
• Pliers (for cutting bolts)
• Chisel 25mm (1”)
• Hammer / mallet
CL 5000AT installation instructions 09-13_Layout 1 13/09/2013 11:22 Page 2