Alpine IXA-W407 - Manual (Page 46)

44
-EN
When the optional rearview camera HCE-C107D is connected, rearview
video can be output to the monitor.
• Be sure to set “Camera IN” to DIRECT before using the rearview
camera HCE-C107D, refer to “Setting the Rear Camera Input”
(page 20).
Switching the Rear Camera Screen
(Optional)
The rear view video will be displayed for the two situations as below.
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
• This function is effective when the reverse wire is properly connected.
Select “Camera” in mode switching screen, and the rearview image
from HCE-C107D is displayed. For details, refer to step 1-2 of
“Recalling the Source” on page 8.
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the iXA-W407,
the Navigation screen can be displayed on this unit.
• Be sure to set “NAV. IN” to ON before using the navigation, Refer to
“Setting the Navigation Mode” on page 20.
Press /VISUAL.
The Navigation screen is displayed.
Pressing again will return to Audio/Visual mode.
The operation is possible with the supplied navigation remote
control.
For navigation operation, refer to the Owner’s Manual of the
navigator.
• The Navigation mode can also be activated by selecting
“Navigation” in mode switching screen. For details, refer to the step
2 of “Recalling the Source” on page 8.
• If the Navigation mode menu is not displayed on the main menu
screen, select ON in “Setting the Navigation Mode” on page 20.
• When the Navigation System is on and in guidance mode, the voice
prompts and navigation map interrupts the current audio source.
HCE-C107D
Operation (Optional)
Displaying the rear view video while the
car is in reverse.
Displaying the rear view video manually
Navigation System
(Optional)