Alpine IXA-W407 - Manual (Page 12)

10
-EN
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch and hold
[A.MEMO] for at least 2 seconds.
The tuner automatically seeks and stores 6 strong stations into
preset station 1 to 6 in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in
preset location No.1 .
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
Tuning to Preset Stations
You can tune in the preset stations in memory on each band using the
preset number.
1
After selecting the desired band, touch [PRESET] to
display the list screen of preset stations.
2
Touch any one of the preset stations (1 through 6)
that has your desired radio station in memory.
The preset station is received.
• Touch [ ] to cancel the list screen of preset stations.
Storing the tag information (HD Radio
mode only)
iTunes Tagging lets you tag songs heard on HD Radio stations. Using
your new iXA-W407 in conjunction with an optional HD Radio Tuner
module, you can preview, buy and download later, songs from your
iTunes tagged playlist the next time you sync your iPod. If the unit is
connected to a Tagging compatible device, you can use the iTunes
Tagging function. For details, refer to the Owner’s Manual of the
Tagging compatible device.
1
When a desired song is heard on an HD Radio
station, touch [P1/2] to change the function guide.
2
Touch [Tag] to save its tag information.
Then you can preview, buy, and download it later from your
iTunes Tagged playlist the next time you sync your iPod.
Changing the Display (HD Radio mode
only)
Text information, such as Station name, Song title, Artist, etc., is
displayed while receiving a digital radio station.
Display example for HD Radio main screen
: The information display changes when the area is
touched while displayed.
Touch the area ( ) on the HD RADIO Tuner mode main
screen.
Each time you touch this area, the display changes as shown
below.
* 1 Displays Short Station Name / Long Station Name in the Station
Information Service Data.
*
2
Displays Song title / Artist / Album in the main program Service
Data.
Receiving a Multicast (HD Radio mode
only)
Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
When a radio station multicast is received, the “MULTICAST”
indicator lights.
1
Touch [ ] in the HD RADIO Tuner mode.
The program list is displayed.
2
Touch the desired program type.
The selected program is received.
3
Touch [ ] or [ ] of PROGRAM on the function
guide.
The sub channel of the received radio station is changed.
Short Station Name *
1
Song title * 2
Artist * 2
Album * 2
Long Station Name *
1