Acer FotoPrisa 300P - Manual (Page 37)

29
FotoPrisa
Chapter 4. Some Useful Tips for Printing
To achieve the best print quality:
Use only genuine FotoPrisa Printer consumables. Genuine
FotoPrisa Printer ribbon cartridges and paper are exclusively
designed for the FotoPrisa Printer to provide the best printing
result. Avoid using any third-party ribbon cartridges or paper as
they may cause malfunction to the FotoPrisa Printer.
4.1 Cautions on using ribbon cartridges and paper
The side without Acer Peripherals logo (or stamp mark) is the
printing side. Load the paper with the printing side face up.
Proper printing is impossible if the surface is dusty or dirty.
Handle the paper with care so you would not touch the printing
side with your fingers. Fingerprints on the printing surface can
cause poor printing results.
Do not print with folded or bent paper. It may cause paper jam
or printer malfunction.
Do not drop the ribbon cartridge or otherwise apply strong
impact on it.
Please do not write or type on the printing surface of the paper
or sticker before you print. You can write or draw on the
printing surface with an oil ink pen after you finish printing.
Avoid storing the printouts with printing surfaces contacting with
each other or with rubber or plastic objects (including vinyl
chloride or plasticizer). Prolonged contact with these objects will
cause the ink on the printouts to transfer on to them.
To prevent damage to the printer, please do not replace the
ribbon cartridge when READY LED indicator blinks.