Acer FotoPrisa 300P - Manual (Page 23)

15
FotoPrisa
2.2.2 The "Print Area" tab
According to the settings in “Orientation”, “Tile” and “Media
Type” in the "Setting" tab, the "Print Area" tab displays the
available print area options and their related information. For
example, if you chose landscape in "Orientation" and "1" in
"Tile" in the "Setting" tab, the “Print Area” tab will show three
available options:
You can click any one of the three thumbnails to choose.
Meanwhile, the related information including image height/width
and border size will be displayed below the thumbnails. You can
choose the gauge unit between “mm” and “inch” from the “Unit”
drop-down listbox. When the unit is changed the Height/Width
and border information will also be updated simultaneously.
If you choose "Sticker (4x4)" as the media type in
"Setting" tab, you will see only one option in the
"Print Area" tab, and no Height/Width or Border
information will be shown.