Acer FotoPrisa 300P - Manual (Page 22)

14
FotoPrisa
Media Type
You can choose between Photo Paper, Sticker (4x4) and Sticker
(Single) in this item. If you use photo paper or postcard for
printing, choose "Photo Paper". If you are printing images on
stickers, please choose "Sticker (4x4)" or “Sticker (Single)”.
If you choose "Photo Paper" as the media, you can tile
(see above) the image in 1, 4 or 16 on the paper, and
the paper can be loaded either manually or
automatically. However, if you choose "Sticker (4x4)"
as the media, only "16" is applicable in the "Tile"
option and you can only load the sticker manually.
Source
Select the paper source of the printer: Auto-Feed Cassette or
Manual Feed. You can choose to load the paper automatically
(from the paper cassette) or manually (from the manual paper
feeding slot).
If "Sticker (4x4)” and “Sticker (Single)" is chosen in
"Media type", only "Manual Feed" is applicable.
Resolution
You can choose either 300x300 dpi or 300x600 dpi as the
printing resolution. Higher resolution creates image with better
quality.
When “Resolution” is set to “300x600 dpi, the
“Orientation” is unchangeable in Preview Window. For
parallel port model, you will have to set the transfer
mode to ECP to use the resolution of 300x600 dpi. For
details, please see page 43 in Chapter 5.