CNB HDS4848E User Manual
Page 32
31
2-4-2. MENU > RECORD > Record
In Record, general recording options can be selected including overwrite, resolution, speed,
recording quality and etc.
•
Overwrite: Select Overwrite to overwrite recorded HDD data when it is full.
•
Auto Deletion(days): Turn on Auto Deletion to delete any data older than the defined days
automatically.
•
Resolution: Select recording resolution.
•
Time Record: Set ips/quality for continuous recording
•
Event Record: Set ips/quality for event recording
•
Emergency Record: Set ips/quality for emergency recording mode.
Note
: The ips needs to be set higher than 1ips for Audio recording at D1 or Half D1 recording
option, otherwise there would be a time delay between recorded Audio and Video sync.
In Event, pre and post recording options for Event can be set.
•
Pre-Event Duration: Video Images occurred right before an Event can be recorded by setting
Pre-Event under Event Mode. Duration Pre-Event recording can be set using Pre-Event(sec) upto
30 seconds.
•
Emergency Record Duration: Time duration can be set for Emergency recording from 5
seconds to 30 minute or continuously by selecting No Limit option.
•
Event Record Duration: Set recording duration for events up to 30 minutes.