CNB NXE3055MR User Manual
Page 8
8 / 23
Network Weatherproof Camera Installation Manual
2
2
.
.
3
3
.
.
3
3
.
.
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
n
n
g
g
t
t
o
o
C
C
a
a
b
b
l
l
e
e
s
s
INPUT, OUTPUT
Alarm Connection
These wires connect to Alarm input/output devices.
Alarm Sensor Input: Connect to an Alarm sensor device such as an IR Sensor or a Heat sensor. The
operation of this input can be configured to either
normally close or normally open.
Alarm Output: Connect to a relay that drives alarm devices such as a
Siren Lamp or an Alarm Light.
The operation of this output can be configured to either
normally close or normally open.
Please refer to “2.3.4 Connection to Alarm Devices” for detailed instruction on how to connect a
sensor and a relay.
POWER IN VIDEO OUT
Power Input
Use the cable adapter (DC12V JACK) in the package to connect power.
Please use the power supply provided in the package.
When connecting to a power supply, please note the following power ratings and the
diagrams below: (DC12V/2A, AC24V 2.5A)
Analog Video Output
This output can be used to check the video during the installation.
Use the supplied BNC connector
Connect the adapter to a video cable with BNC termination.
(Select Video Out in menu to enable this output)