CNB MXC6050IR - Manual (Page 26)

M M X X C C 6 6 0 0 5 5 0 0 I I R R U U s s e e r r ’ ’ s s G G u u i i d d e e
Rev.1.0 (Dec. 2013) 26
Appendix A – Exchanging (micro)SD-card
(micro)SD card is a non-volatile memory device for storing video and audio data on the product. Continued writing to
the (micro)SD card will cause wear-off of the memory cell.
When you plug out the (micro)SD card for replacement or other purpose, follow the steps below in order to prevent
data loss.
1. Press factory default button for 1 sec to unmount the (micro)SD card.
a. (micro)SD card can also be unmounted by going to Admin Page -> Sensor&Capture Setup and
clicking on CONFIRM button at the right of SD Card Unmount menu.
2. Unplug the (micro)SD card.
a. If no action is taken within 1 minute, SD card will be mounted again.
3. Plug in new (micro)SD card
4. If the (micro)SD card is a new one for the IP camera, format the (micro)SD card by following through the
steps below.
a. Go to Admin Page -> Sensor&Capture Setup
b. In the SD card management menu, click on CONFIRM button at the right of SD card Format.
For more detailed information regarding connection to admin page, please refer to the
“
User manual_Eng_Rev.1.0 ” Guide.