KT&C KPC-HDX222M - Manual (Page 21)

21
9. OSD MANUAL
3. WDR/BLC
- MODE : Select WDR / BLC mode.
• WDR : Act in wdie dynamic rage mode. Controled video frame rate in 1/2.
• BLC : Act in Backlight compensation mode.
• D-WDR : Digital wide dynamic range control.
- WDR WGT : WDR weight control level settig at WDR mode.
- BLC OSD : Display BLC control zone in screen.
- BLC POS-X : Select BLC control zone vertical position.
- BLC POS-Y : Select BLC control zone horizontal position.
- BLC SIZ-X : Select BLC control zone vertical size.
- BLC SIZ-Y : Select BLC control zone horizontal size.
4. DNR: Reduce image’s noise
5. DAY & NIGHT
- MODE : Select TDN(True Day & Night control) mode.
• AUTO : Camera controlled automatically to decide day or night environment
using AGC calculation data or input level data from CDS sense.
• COLOR : Fix to mode at day environment setting.
Make video image act in color.
• B&W : Fix to mode at night environment setting.
Make video image act in B/W.
■ D/N DETECT : Fixed selection to AGC for TDN auto control.
■ DELAY
: Delay time for change day or night mode at auto mode.
■ D->N LEVEL : Threshold level for change Day to Night mode.
■ N->D LEVEL : Threshold level for change Night to Day mode.
6. IMAGE
- SHARPNESS : Adjust image sharpness level.
- GAMMA : Gamma curve select.
- FLIP : Vertical & Horizontal flip setting.
- LENS SHADING : Enable lens shading compensation.
- DZOOM
: Select digital zoom magnification.