King Technology Perform-Max Feeders - Manual (Page 14)

POOL S ANITIZER
POOL S ANITIZER
POOL S ANITIZER
POOL S ANITIZER
SCOOPS
2" - 36"
APART
POOL
SANITIZER
1 3 4 5 6 7 9
BRO MINE
P O O L S 2
TRICHLOR
MIN MAX
8 L A R G E R S P A S S M A L LE R PO OL S LA R G ER P O O L S
MA
14
2" - 36" apart on straight pipe
For best results use Phillips pan
head screws through the
mounting holes at the Perform-
Max base to secure the Perform-
Max into a treated wood base.
I solating the Perform-Max by installing a corrosion resistant check
valve is recommended to protect the equipment and prevent
discoloration of pool surface.
7. 8. 9. 10.
11. 12. 13.
15.
14.
16.
17.
Attach a gasket to
each scoop.
Place scoops
inside holes so
the inlet scoop
faces the water
flow and the
outlet scoop
faces away from
the water flow.
Tighten scoop clamps with a
screwdriver.
When pipe is
totally dry,
drill two 19/32"
or 5/8" holes
between 2” - 36”
apart on the return
line. Be careful not to
go through other side
of pipe.
Arrows on scoops must face each other.
Screw elbow into reducer
bushings on both sides.
Cut tubing
to size for
each
Perform-
Max
connection
and attach
one to each
elbow with
clamps.
Tighten clamps
with a screwdriver.
Attach scoop clamps over
the scoops and around the
pipe.
Attach each hose to a
venturi scoop male nipple
with a small clamp and
tighten with screwdriver.