Jungheinrich EMC_B10 - Manual (Page 4)

Make use of the advantages
Safe and comfortable stacking
and retrieval
All lifting and lowering functions are easily
controlled from the multi-functional tiller
head, allowing the operator to focus entire-
ly on stacking and retrieval. Further features
make stacking and retrieval particulary
safe and productive:
½ Precise and gentle depositing of loads
into the racking or on the floor. The
lowering speed is electro-hydraulically
controlled (in 2 stages) sensitively by
button on the tiller head (optional).
½ High lifting speed increases productivity.
½ Automatic regulation of the lift height
with intelligent lift positioning (option-
al).
Working in very confined spaces
The EMC is an especially compact pedestri-
an stacker. The extremely short chassis
length and low vehicle weight allowing
use in extremely confined spaces, in the lift
and on mezzanines. The EMC is also
equipped with a crawl speed button. A
press of the button is all that‘s needed for
the EMC to manoeuvre safely, even with
the tiller up right.
Working ergonomically
The recently developed tiller head is per-
fectly adapted to the ergonomic needs of
the operator:
½ Colour scheme for intuitive operation
and buttons with wear-resistant icons.
½ Grip angle to suit the hand position of
the operator.
½ Rocker switch for consistently good
operation in all tiller positions.
½ Horn button placed in the centre of the
tiller where it can be reached quickly.
Wide track version of EMC B10
½ Ideal for lifting perimeter based pallets.
½ Use of attachments (e. g. cranehooks or
barrel turners) with optional FEM / ISO
fork carriage.
Lower maintenance costs
Service-friendly components ensure lower
maintenance costs in the long-term:
½ Maintenance-free 3 phase drive motor.
½ One-piece front cover provides quick
access to all components.
Long operating times
The battery, when used together with the
energy-saving 3 Phase system, gives long
operating times.
½ Maintenance-free 24 V / 70 ah batteries
(gel fleece).
½ Integrated 230 V charger for easy charg-
ing at any 13 Amp mains socket.
½ Integrated 110 V charger (optional).
Additional equipment
½ Tandem load wheels
½ CanCode for PIN activation (instead of
key switch) and automatic shut-off func-
tion.
½ Discharge indicator and CanDis operat-
ing hours counter.
½ FEM
/ ISO fork carriage with forged
forks.
Long safety tiller
Operating as a lifting table
EMC B10 with FEM / ISO fork carriage (optional)
and forged forks
8758.GB.6.2009.r.s.
Jungheinrich trucks
conform to the European
Safety Requirements.
Jungheinrich UK Ltd.
Head Office:
Sherbourne House · Sherbourne Drive
Tilbrook · Milton Keynes MK7 8HX
Phone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich
Plants, Sales and
Services Europe
ISO 9001/ ISO 14001