Jungheinrich EJC_212–214–216–220 - Manual (Page 4)

Benefit from the advantages
Precise and easy load stacking Plenty of storage options to keep
important items close to hand Built in charger cable and plug
Intelligent control and drive tech-
nology
Our motors use three-phase AC technol-
ogy with electronic controllers perfectly
optimised to your application offering
more performance while reducing oper-
ating costs. Make use of these benefits:
• High efficiency with excellent energy
management.
• Powerful acceleration.
• Fast direction change.
• Maintenance free AC drive motor.
Safe and comfortable stacking and
retrieval
All lifting and lowering functions can be
intuitively controlled using the multi-
functional tiller arm. This allows the
operator to concentrate fully on stacking
and retrieving:
• Precise, gentle load lifting by speed
controlled and noise-reduced hy-
draulic motor.
• Gentle depositing of loads using pro-
portional hydraulics.
• Automatic reduction in speed with
raised load.
• Four-wheel concept for maximum
stability.
• LiftPlus (optional): The EJC 214/216
achieves a significantly higher lift speed
with a light load (up to 400 kg).
Practical storage compartments
The EJC offers plenty of storage space
for a tidy workplace:
• Paper storage in the top panel.
• Storage compartments in the dash-
board.
• Clip pad.
Robust design
The EJC has been particularly robustly
designed:
• One-piece, hot-rolled box section
forks.
• Torsion-resistant mast with high
residual capacities.
• Battery lid made of solid sheet steel.
• Front apron reinforced with additional
beading and contouring.
Service-friendly technology
• Service access ports on the front of the
chassis for fast tyre change.
• Castor wheel with bayonet mechanism
for easy wheel change with the truck
raised only slightly.
• Easy to install mast with screw con-
nection.
• Tiller electronics are completely sealed
to protect against humidity and dirt
according to the IP65 standard.
• Electronic controller sealed according
to IP54 protection.
• Built-in charger for the EJC 212
(optional) is protected against humidity
and dirt according to the IP54 pro-
tection.
Long operating time
Large battery capacities and low con-
sumption ensure long operating times.
The built-in 24-V charger (optional) for
wet cell batteries and maintenance-free
batteries guarantees easy charging at any
standard 240-V mains socket. This built-
in charger in the EJC 212 is also available
with a with quick charging function for
charging within a shift. The EJC 212 can
also be used with the built-in charger in
the cold store.
• Battery compartment M: 2 PzB 225 Ah/
2 PzB 300Ah (EJC 212/214/216).
• Battery compartment L: 3 PzS 375 Ah.
• Lateral battery exchange (optional) for
multi-shift use.
Additional equipment
• Tandem load rollers.
• Twin rollers for support wheel to
reduce wear.
• CanDis: Discharge indicator and hour-
meter.
• CanCode: Access control via PIN.
• Load guard.
• Gentle depositing of the load on the
ground.
• Cold store version.
• Connection option e.g. for terminal,
scanner or printer.
T_EJC 212/21
4/216/220 _04201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.