Jungheinrich EJC_212z–214z-216z - Manual (Page 4)

Benefit from the advantages
Negotiating a ramp with the EJC
212z/214z/216z Double-decker mode (optional) CanDis and CanCode display
instruments
“Intelligent” controls and progressive
drive technology
Jungheinrich three-phase AC motors
offer greater performance whilst reduc-
ing operating costs. Make the most of
these advantages:
• High level of efficiency with excellent
energy management.
• Powerful acceleration.
• Rapid direction change
• Jungheinrich SpeedControl - roll-back
protection on inclines.
• No carbon brushes – maintenance-
free drive motor.
Versatile support arm lift
A second lifting mechanism, the support
arm lift, is used to raise the support arms
independently of the forks. As a result,
the EJC 212z/214z/216z can overcome
uneven ground, ramps and loading
bridges with ease. Support arm and mast
lifts operate independently of each other.
The advantage: Double-decker transport
of two pallets simultaneously is possible
(optional).
Safe and comfortable stacking and
retrieval
All lifting and lowering operations are
easily controlled by the multi-functional
tiller arm. This allows the operator to
concentrate fully on stacking and re-
trieving. Other safety features that make
stacking safe and efficient include:
• Precise, sensitive load lifting by speed
controlled and noise-reduced hy-
draulic motor.
• LiftPlus (optional) enables the EJCz
214/216 to achieve a significantly
higher lift speed with a light load (up to
400 kg) in comparison with the stan-
dard version. For improving throughput
when stacking!
• Gentle depositing of loads using pro-
portional hydraulics.
• Additional reduction of travel speed
from lift heights of approx. 1.8 m.
• Rounded and enclosed truck contours.
• Four-wheel concept for maximum
stability.
High performance in every situation
The EJC 212z/214z/216z has been de-
signed for intensive operation. Its power-
ful lift motor (2.2/3 kW) and dynamic 1.6
kW drive motor in 3-phase AC technol-
ogy ensure maximum throughput. Other
advantages:
• 8 mm thick steel frame.
• Heavy-duty rolled box section forks.
• Torsion-resistant mast with high
residual capacities.
Service-friendly design
• Slow travel with lowered forks reduces
fork wear (optional).
• Service access ports on front apron.
• Support wheel with intelligently de-
signed “bayonet” mechanism enables
the wheel to be replaced from the top
without having to raise the truck.
Fully informed at all times
Extensive instruments and setting
options allow the operator to monitor
the situation at a glance:
• Discharge indicator (3-colour LED)
with lift cut-out.
• CanDis information display (optional)
showing operating hours and control
messages.
• Activation of truck via PIN and selec-
tion of 3 travel programs via CanCode
(optional).
• Travel parameters can be set via CanDis
and CanCode (optional).
Long uptimes
Large battery capacities ensure long
uptimes:
• MX battery compartment: 2 PzS 250 Ah
• LX battery compartment: 3 PzS 375 Ah
• On-board charger (24V/30A) for wet
cell batteries and maintenance-free
batteries for easy charging at any 230 V
mains socket (optional).
• The standard side battery removal, for
intensive multi-shift operation.
Additional equipment
• Twin rollers for support wheel to
reduce wear
• Cold store version.
• Tandem load rollers.
• Load guard.
• Slow depositing of the load on the
ground.
T_EJC 212z/21
4z/216z_01201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.