Jungheinrich ERC_212–214–216–220 - Manual (Page 4)

Benefit from the advantages
ERC storage compartment ERC operator position Easy to operate mains connector
for on-board charger
‘Intelligent’ control and advanced
drive technology
The ERC 212/214/216/220 is equipped
with a modern 3-phase AC drive motor,
offering you greater performance while
simultaneously reducing operating costs.
Make the most of these advantages:
• High level of efficiency with excellent
energy management.
• Powerful acceleration.
• Rapid direction change.
• Jungheinrich SpeedControl – roll-back
protection on gradients.
• No carbon brushes - maintenance-free
drive motor.
Flexible operation
Different models for a whole range of
applications:
Model 1: Folding stand-on platform
without side arms
• Pedestrian mode.
• Travel speed (6 km/h) with platform
folded down.
• Travel speed (4.4 km/h) when platform
folded up.
Model 2: Folding stand-on platform with
side arms (optional)
• Pedestrian/ride-on operation.
• 7 km/h travel speed.
Model 3: Folding stand-on platform
with side arms and high DrivePlus speed
(optional)
• Pedestrian/ride-on operation.
• 9 km/h travel speed (ERC 220: 8 km/h).
Easy stacking and retrieval
All lifting and lowering functions are
comfortably controlled by the multifunc-
tional tiller arm without having to reach
forward. The lift motor is electronically
controlled. This enables the forks to be
positioned precisely when stacking or
retrieving pallets, less load on the elec-
tronics and also significantly reduced
noise when lifting. The proportional
hydraulics ensures precise and gentle
depositing of loads in the racking or on
the floor. In confined spaces the stand-
on platform and side arms can simply
be folded in and the ERC can be used
as a pedestrian truck. LiftPlus (optional)
enables the ERC 214/216 to achieve a
significantly higher lift speed with a light
load (up to 400 kg) in comparison with
the production version. For improving
throughput when stacking!
Robust design
The ERC is designed for high highly
productive applications:
• 8 mm steel chassis.
• Enclosed chassis.
• Robust mast with high residual
capacities.
Comfortable and safe operation
• The electric tiller steering is particularly
precise and allows for easy steering
and fatigue-free operation, even in
confined spaces. Curve Control auto-
matically reduces the speed when
cornering to a safe level.
• The sprung stand-on platform accom-
modates major surface unevenness,
thus effectively removing strain on the
operator’s spine.
• Soft lined side arms (optional) ensure a
comfortable posture when cornering.
• The low platform height ensures easy
entry/exit.
Long uptimes
Battery capacities of up to 375 Ah ensure
long uptimes:
• 3 EPzS 240/270/375Ah.
• Side battery removal option for multi-
shift environments.
• On-board charger (24V/30A) for wet
cell batteries and maintenance-free
batteries for easy charging at any 230
volt mains socket (optional).
Additional equipment
• CanDis control instrument.
• LiftPlus.
• Twin roller support wheel to reduce
wear.
• CanCode access control.
• Cold store version.
• Load guard.
• Gentle depositing of load.
T_ERC 212/21
4/216/220_04201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.