Jungheinrich TFG_S90 - Manual (Page 4)

Ergonomic cabin
Comfortable, performance orientated
ergo nomics.
• Easy vehicle entry and exit; low step
position, easily viewable from above.
• Operator cabin completely sealed from
engine and suppressed against noise
and vibration.
• Smoothly adjustable and mechanically
cushioned comfort seat (air cushioning
optional).
• Adjustable steering column.
• Hydraulic levers fixed to the operator
seat (SOLO-PILOT) automatically fol-
low all seat adjustments.
• Travel direction switch on the steering
column (optionally available integrated
into the MULTI-PILOT control lever).
• Abundant and comfortable leg room
with combined brake/inch pedal.
• Excellent visibility through the mast
due to the location of hydraulic cylin-
ders hidden behind the mast profiles.
• Comfortable operation in all weather
conditions with the comprehensively
equipped standard cabin.
• Specially designed roof and cabin walls
offering exceptional all-round visibility
• 180 degrees turning (left) seat (optional).
Powerful engines
The LPG industrial engines are specially
designed for the required drive power in
fork lift truck applications.
• TFG 660–690 and S80/S90: 8-cylinder
engine (5.7-l-GM) producing 85 kW
at 2200 U/min. Maximum Torque:
390 Nm at 1400 U/min.
• Powerful engine with electronic engine
management at low rpm and high
torque.
• Exhaust emissions below allowable
emission values in accordance with
ISO 8178.
• 90 litre fuel tank integrated into chassis.
Resilient hydrodynamic drive
The hydrodynamic drive with elec-
tronically controlled 2 speed power shift
transmission ensures an economic trans-
mission of power. Other advantages:
• Precise and smooth power transmission.
• Automatic shift and electronically
controlled shift lock at travel speeds of
more than 4 km/h.
• Inch pedal (combined crawl-speed/
brake pe dal) for precise travel during
full lift capacity.
• Travel comfort packet (optional) with
automatic increase in rpm during
lifting, hydrostatic handling and large
multifunction display. Especially suited
for reversing and manoeuvring.
Service
Low service costs through good acces-
sibility.
• Tiltable cabin – hinged at the rear and
hydraulically operated.
• Simple access for daily maintenance
(oil and water).
• Long service intervals of 500 hours.
Intelligent electronics
• Splash proof electronic drive and hy-
draulic controllers (in accordance with
IP 64) connected via CAN-Bus.
• 12 Volt battery, 135 Ah/115 A alternator.
• Precise control of hydraulic functions
using electromagnetic valves.
Precise steering
The maximum in steering comfort and
highest safety through;
• Hydrostatic steering for extremely light
and precise steering.
• Steering axle with integrated steer
cylinder.
Brakes
Two independent brake systems on the
front wheels.
• Foot brake – hydraulic servo; mainte-
nance free, encapsulated oil laminate
brakes with servo assistance.
• Parking brake: electro-hydraulic disk
brakes operated via a button located
on the display.
Reliable hydraulics
• Fine filtration in the fluid return circuit.
• 180 l hydraulic tank integrated into the
chassis.
• Filtration of hydraulic tank ventilator.
• Pressure release valves protect against
over pressurisation and overload.
Strong mast
• Slim mast profiles with lift cylinders
hidden behind allow an extra wide field
of view.
• Optimised visibility through the fork
carriage.
• Fork carriage in accordance with FEM/
ISO-2328-4A.
Additional equipment
Many custom build options and various
attachments are available in order to
adapt the truck to suit customer requests
or different applications.
Make use of the advantages
Operator cabin
4070
.UK.12.2012.r.s.
Jungheinrich UK Ltd.
Head Office:
Sherbourne House · Sherbourne Drive
Tilbrook · Milton Keynes MK7 8HX
Phone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich trucks
conform to the European
Safety Requirements.
Jungheinrich
Plants, Sales and
Services Europe
ISO 9001/ISO 14001