IQinVision Sentinel Series - Manual (Page 5)

5
5 Parts List
The following depicts the parts included (Figure 1):
1. Indoor / Outdoor Camera and Lens Module
2. Wall, Ceiling & Parapet Arm
3. Power / Data Back Box
Tools required:
3 mm Allen wrench (supplied)
Small straight-blade screw driver
Punch down tool (supplied)
6 Camera Fittings
The IQeye Sentinel cameras are shipped with Heyco Liquid Tight snap-in
plugs (#4014) that are factory installed into the back box. These plugs
are rated to IP67 and can adequately seal cable diameters that range
from 3-5 mm (0.12-0.2 in).
For larger cables, like CAT5, it is recommended to replace the factory
installed plugs with the optional Heyco Liquid Tight fittings (#3207) that
are included in the accessory kit. These fittings are appropriate for cable
diameters that range from 2.90 mm (0.114 - 0.250 in). Please visit
www.iqeye.com/faq for details on using these optional cable fittings.
Figure 1
2
3
1