IQinVision Sentinel Series User Manual
Page 14
14
4. To view a camera, double click a camera entry or highlight a camera in the
list and click the “Web Page” button (Figure 14). The “Live” page will be
displayed through the default browser (IE recommended). It is also possible
to open Internet Explorer and enter the IP address of the IQeye camera in
the address field of the browser. If prompted, install the Active X control (Figure 15).
5. To perform further configuration of the camera, click on the “Setup” tab.
NOTE: The default username is “root” and the default password is “system”.
6. To prepare the camera to serve the H.264 stream (IQ86x Series), select
H.264 from the video format drop-down (Figure 16). To view the H.264
stream full screen (without “Live” page controls) double click on the video
area. Double click on the video image again to return back to the “Live” page.
7. For additional information and technical documents, please visit:
www.iqeye.com/faq
Figure 14
Figure 15
Figure 16