IQinVision Sentinel Series - Manual (Page 11)

11
5. If mounting the unit outdoors, please take necessary and thorough measures
to ensure the camera unit is properly sealed from inclement weather. An
example would be to use silicone sealer around the back of the base, being
sure to surround all holes with a generous bead of sealant to the outer edge
of the back box surface. The sealing method chosen should be in accordance
with any local, state, county and country requirements and laws.
Blink Patterns
The IQeye Sentinel all-weather megapixel camera is equipped with two status
indicator LEDs which can be seen on the back of the Sentinel enclosure. During
normal operation, the following colors and patterns should be visible (Figure 11):
If the Sentinel camera fails to power up or indicate a network connection or show
activity, please contact IQinVision technical support for assistance.
Figure 11