INTELLINET NETWORK 524735 Wireless 300N PoE Access Point User Manual - Manual (Page 72)

66
Chapter III: Advanced Configuration
3-1 Configuration Backup and Restore
You can back up all configurations of this access point to a file,
allowing you to make several copies of your access point
configuration for security reasons.
To back up or restore an access point configuration, follow these
instructions:
Click Configuration Tool on the left side of the Web management
interface, and the following will be displayed on your Web browser:
Here are descriptions of every buttons:
Backup Settings Click “Save...” and you’ll be prompted to
download the configuration as a file. The
default filename is “config.bin.” You can save it
as another filename for different versions and
keep it in a safe place.
Restore Settings Click “Browse…” to pick a previously saved
configuration file from your computer, then
click “Upload” to transfer the configuration file
to the access point. After the configuration is
uploaded, the access point’s configuration will
be replaced by the file you just uploaded.
Restore to
Factory Default Click to remove all settings you’ve made and
revert the configuration of this access point to
factory default settings.