INTELLINET NETWORK 524735 Wireless 300N PoE Access Point User Manual - Manual (Page 65)

59
2-9 MAC Filtering
Another security measure you can use to keep hackers and
intruders away is MAC filtering. You can pre-define a so-called
“white-list,” which contains MAC addresses of the wireless clients
you trust. All other wireless clients with MAC addresses not on your
list will be denied by this wireless access point.
To set up MAC filtering, click MAC Filtering on the left side of the
Web management interface and the following messages will be
displayed:
This page contains two parts of MAC filtering information. All
allowed MAC addresses will be listed in the upper part (1), and you
can add new MAC addresses by components in the lower part (2).
Here are descriptions of every setup item:
Select
Check this box to select one or more MAC
address(es) to delete.
Delete Selected Click to delete all selected MAC address(es).
Delete All Delete all MAC address entries.
Reset Uncheck all selected MAC address entries.
Address
filtering
table (1)
Add
new entry
here (2)