INTELLINET NETWORK 524735 Wireless 300N PoE Access Point User Manual - Manual (Page 67)

61
2-10 System Utilities
This access point provides control functions that include password,
IP address management and DHCP server function. Click System
Utility on the left side of the Web management interface to access
these functions. Below are detailed descriptions of each function.
2-10-1 Change Password
You can change the password used to enter the Web configuration
menu of this wireless access point.
Click System Utility on the left, and the following will be displayed:
Input the current password in the “Current Password” field, then
input the new password in both the “New Password” and “Re-Enter
Password” fields. Click “Apply,” and the following message will be
displayed:
When you see this message, the settings you made are
successfully saved. Click “Continue” to go back to the previous
page and continue with other settings, or click “Apply” to restart the
wireless access point. Changes will take effect after about 30
seconds.