INTELLINET NETWORK 523929 Fast Ethernet Office Switch - Manual (Page 2)

2
ENGLISH
Fast Ethernet Office Switch • User Manual English
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS ™ Fast
Ethernet Office Switch, Model 523929. For specifications, go to
www.intellinet-network.com.
PLACEMENT
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch;
• with a minimum of 25 mm (approx. 1”) of clearance on the top and
sides for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband
amplifiers, etc.;
• where it cannot be affected by excessive moisture.
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch
and secure it in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
CONNECTIONS
1. Use the included power cable to connect the receptacle on the back
of the switch to a power outlet, and confirm that the Power LED lights.
2. Make your connections to PCs, routers, hubs, other switches, etc.
• All ports on the switch support Auto-MDI/MDI-X functionality, so
crossover cables and uplink ports are not needed.
• When both the SFP mini-GBIC (fiber) and RJ45 Gigabit (copper) ports
are connected, the system adopts the fiber interface and disables the
corresponding copper port automatically.
• 10/100 auto sensing ports automatically detect optimal network
speeds; supports any combination of 10 Mbps or 100 Mbps network
devices with full/half-duplex operation.