For operating systems other than win7 – INTELLINET NETWORK 524995 Wireless 300N Dual-Band USB Adapter User Manual User Manual

Page 7

INSTALLATION

3. Windows 7 will detect the new hardware and try to connect to the

Internet to download the latest driver. This may take a minute or so

depending on your Internet connection.

4. The installation is completed. You do not need to install any driver or

software from the installation CD.

This is the recommended method of installation for Windows 7. If this

procedure isn’t feasible (because your computer doesn’t have an Internet

connection, for example), install the driver from the installation CD (see

the Windows 7 quick installation guide on the CD for details).

FOR OPERATING SYSTEMS OTHER THAN WIN7

1. With your computer on, gently insert the

adapter into a USB port. NOTE: If the

adapter doesn’t easily slide into the port,

flip it over and try again.

2. The Welcome to the Found New Hardware

Wizard screen will display automatically.

Click “Cancel” to continue.

3. Insert the included setup CD and run the “autorun.exe” program. On

the main screen, click “Driver and WLAN Configuration Utility