INTELLINET NETWORK 524995 Wireless 300N Dual-Band USB Adapter User Manual - Manual (Page 28)

28
AP / STA+AP
being connected to by unauthorized users.
Allow BW 40 MHz: Check this box to allow BW 40 MHz capability.
Tx Burst: Check this box to accelerate the data transmit rate. It may not
work with all wireless access points and wireless devices.
Default: Click to use the default value.
Apply: Click to apply the setting change(s).
SECURITY SETTING
This screen — accessed by clicking “Security Setting” on the previous
Configuration screen — lets you to configure the authentication mode
and encryption algorithm used within the AP.
Authentication Type: Four types of authentication mode are
supported and presented in the drop-down menu.
Pre-Shared Key