Installing appliancelinc – INSTEON ApplianceLinc (2456S3) Manual User Manual

Page 5

ApplianceLinc Owner’s Manual

• Don’t stack INSTEON home automation devices together by plugging them into one another.

Stacked modules may overheat and stop functioning.

• Don’t use ApplianceLinc to control devices that preserve, maintain, or contribute to human or

animal safety or life support

If you have any questions, please call:

INSTEON Gold Support Line

800-762-7845

Installing ApplianceLinc

1) Plug the lamp/device (also called the load) you want to control into the

outlet on the bottom of ApplianceLinc

2) Plug ApplianceLinc into an unswitched wall outlet

The ApplianceLinc Status LED and the load will turn on

3) If the load does not turn on, turn it on manually using the switch on the

load itself

4) OPTIONAL: You can use the pass-through outlet on the front of

ApplianceLinc as you would an ordinary uncontrolled wall outlet.
However, do not plug another home automation product into this outlet.

5) Tap the Set button on ApplianceLinc to toggle the load on and off

NOTE: After completing installation, you will not be able to use the load’s built-in switch to control the
device, unless you have enabled the Load Sensing feature. See Enabling/Disabling Load Sensing.

Page 5 of 12