Removing the x10 address – INSTEON LampLinc Dimmer Module (Dual-Band) (2457D2) Manual User Manual

Page 24

background image

24

Removing the X10 Address

1

Press and hold the set button

on your Dimmer Module until the

device beeps.

2

Press and hold the set button

again until the device beeps.

3

Using an X10 controller, send the

programmed X10 address followed

by the On command three times.

®

X

Your INSTEON controller will no

longer control your Dimmer Module.

®

®

A1 ON ON

ON