INSTEON SwitchLinc Dimmer (Dual-Band) - (2477D) Manual (Prior to Version 7.0) - Manual (Page 12)

Page 12 of 16 Rev: 1/21/2014 7:12 AM
Error Blink
Default = on. This setting is adjustable via software or a central controller only. SwitchLinc LED blinks for
a few seconds if one or more responders do not acknowledge a message.
Specifications
General
Product name SwitchLinc Dimmer
Brand / manufacturer INSTEON
Manufacturer product number 2477Dxx
UPC
White - 2477D: 689076401746
Almond - 2477DAL: 813922010534
Light Almond - 2477DLAL: 813922011579
Black - 2477DBK: 813922010541
Gray - 2477DGY: 813922010565
Ivory - 2477DIV: 813922010572
Brown - 2477DBR: 813922010558
Warranty 2 years, limited
INSTEON
INSTEON powerline mesh repeater Yes
INSTEON RF mesh repeater Yes
INSTEON controller Yes
INSTEON responder Yes
Maximum links / scenes 400
Load brightness levels
32 when controlled by other devices
256 when controlled by software
Brightness of LEDs Adjustable, from off to bright
Local on-level Adjustable, 32 fixed brightness levels or resume dim
Local ramp-rate
Adjustable from 0.1 seconds to 5 seconds locally (instant to 8 minutes via
software)
Local control Yes
Commands supported as controller
On Off
Fast-on Fast-off
Brighten Dim
Commands supported as responder
On Off
Fast-on Fast-off
Brighten Dim
Incremental brighten Incremental dim
Beep
Software configurable Yes
RF range Up to 100’ open air
Phase bridge detect beacon Yes
INSTEON device category
0x01 dimmable lighting control (all frequencies)
INSTEON device subcategory
0x31