Hach-Lange FILTERTRAK FT 660 sc User Manual - Manual (Page 27)

Replacement parts and accessories (continued)
Description Quantity Item no.
Detergent, Liquinox 0.946 L 2088153
Drain assembly funnel 1 5237100
Dry standard quick check verification (VQC)
kit, includes:
1 6735500
- Dry standard 1 6735800
- Protective case for the dry standard 1 6735400
- Disposable wipes 1 2097000
Floor stand 1 57432-00
Flow meter, 500–700 mL/minute 1 4028200
Funnel 1 5237100
Load termination box * 1 5867000
Plug, sealing, conduit opening 1 5868700
100 mNTU, StablCal Certified Standard for
verification of the FT660 sc
1 L 27233-53
300 mNTU, StablCal Certified Standard for
verification of the FT660 sc
1 L 26979-53
500 mNTU, StablCal Certified Standard for
verification of the FT660 sc
1 L 26980-53
800 mNTU, StablCal ® Certified Standard for
calibration and verification of the FT660 sc **
1 L 2788453
1000 mNTU (1.00 NTU), StablCal Certified
Standard for verification of the FT660 sc
1 25897-56
Strain relief, Heyco 1 16664
Tubing, sample in, ¼-inch O.D., Polyethylene 0.3 m (1 ft) 4215200
Tubing, sample out, ½-inch I.D., ¾-inch O.D.,
Tygon R3603
0.3 m (1 ft ) 5126300
* Required if the distance between the instrument and sc controller is greater
than 31 m (101 ft)
** EDA approved for calibration.
English 25