Hach-Lange DR 3800 Additional Software LINK2SC - Manual (Page 16)

4
Section 2 Installation
2.1 Unpack the equipment
The software LINK2SC comes packaged with the following items:
• SD SanDisk card (storage card) which includes the software
LINK2SC and USB adapter
• User manual
Note: If any of these items are missing or damaged, contact the
manufacturer or a sales representative immediately.
2.2 Installation of the software
To update the DR 3800 with the new LINK2SC software use the
supplied USB adapter.
1. Plug the external power supply to an electrical outlet.
2. Turn the DR 3800 on by pressing the power switch on the back.
3. Select System Checks in the Main Menu.
4. Press Instrument Update in the System Checks menu.
5. Insert the SD SanDisk card in the USB adapter and connect the
USB adapter to the USB interface (type A) on the instrument.
6. Press OK. The link is established automatically and the
software is updated.
7. Press OK to return to the System Checks.
8. Press Main Menu to return to the Main Menu.