Hach-Lange FILTRAX User Manual - Manual (Page 39)

Operation
37
5.4 [+SIGNALS] menu
The [+SIGNALS] menu is used for service and inspection by the manufacturer. It
is not needed for operation and the instrument settings.
Note: While the instrument is in this menu, normal operation continues. If a key is not
pressed for longer than ten minutes, the display automatically returns to the display of the
data on operation.
MENU
Command
Description
+SIGNALS
MODUL A
Parameter for the flow rate in module A (single measurement),
approximately corresponds to a sample volume in ml/h
MODUL B
Parameter for the flow rate in module B (single measurement),
approximately corresponds to a sample volume in ml/h
TEMPERATURE (housing)
Temperature in the control unit in °C or °F
AMPL.
Photometer gain
MEAS-Z
Level of the last valid zero measurement
MEAS
Level of the last valid flow rate measurement
MEAS-F
Current measured level