Hach-Lange UVAS sc - Manual (Page 17)

17
Section 4 Operation
4.1 sc controller operation
The sensor can be operated with all sc controllers. Become familiar with the
functionality of the sc controller before using the sensor. Learn how to navigate
the menu and execute the corresponding functions.
4.2 Sensor setup
When the sensor is connected for the first time, the sensor serial number is
displayed as the sensor name. The sensor name can be changed as follows.
1. Open the MAIN MENU.
2. Press SENSOR SETUP and confirm.
3. Select the corresponding sensor and confirm.
4. Select CONFIGURE and confirm.
5. Press EDITED NAME and confirm.
6. Edit the names and confirm to return to the CONFIGURE menu.
Complete the system configuration in the same way by defining settings for the
following menu items:
• SET PARAMETER
• MEAS UNIT
• MEAS INTERVAL
• CORRELATION
• REFERENCE
• MEAS INTERVAL
• RESPONSE TIME
• CLEANING
• WIPER MODE
• BYPASS
• SET DEFAULTS
4.3 Sensor data logger
A data storage unit and an event memory unit are provided for each sensor. The
data storage unit stores measurement data at predefined time intervals, while the
event memory unit stores events such as configuration changes, alarms and
warning conditions. Both storage units can be output in CSV format (refer to
sc controller manual).