Hach-Lange Sipper Module for DR 5000 - Manual (Page 2)

2
Sipper module
Specifications
Specifications are subject to change without notice.
Unpacking the sipper module
Remove the Sipper Module from the shipping container and inspect it for any damage that
may have occurred during shipment. All models are shipped with
• Sipper Module
• Sipper Accessories Kit
If any of these items are missing or damaged, contact the manufacturer or a sales
representative immediately.
Available Path Lengths 2.42 cm (1 in.); 1 cm (0.394 in.)
Wavelength Range 190 to 1100 nm
Rinsing Volume At least 20 mL for 1-inch path length; at least 10 mL for 1-cm path length
Flow Rate 1 mL/second (nominal)
Storage Temperature –17 to 60 °C, 85% relative humidity, non-condensing
Operating Temperature
10 to 40 °C; 95% relative humidity, non-condensing at 25 °C; 75% relative humidity,
non-condensing at 40°C
Figure 1 Sipper accessories kit
1 Rubber Fitting 4 Sample/Inlet Tubing 7 Locking Screws (2)
2 Sipper Cell, 1-cm 5 Drain/Waste Tubing 8 Guide Tube
3 Outlet Connector (from pump to drain) 6 Pump Tubing (white)