Hach-Lange SI794 C User Manual - Manual (Page 99)

99
Sensocheck
sensor monitoring Polarization detection and monitoring of
cable capacitance
Sensoface Provides information on the sensor condition
(Sensocheck)
Sensor monitor Direct display of measured values from sensor for
validation (resistance/temperature)
USP function Water monitoring in the pharmaceutical industry
(USP) with additional user-defined limit value (%),
output via relay contact
Temperature input * Pt100 / Pt1000/ NTC 30 kΩ /
NTC 8.55 kΩ (Betatherm)
2-wire connection, adjustable
Measuring range Pt100 / Pt1000 -20 ... +200 °C
(-4 ... 392 °F)
NTC 30 kΩ -20 ... +150 °C
(-4 ... 302 °F)
NTC 8.55 kΩ -10 ... +130 °C
(+14 ... 266 °F)
Resolution 0.1 °C / 1 °F
Measurement error 1,2,3) 0.5 K
(< 1 K for Pt100; <1 K for NTC >100 °C)
Temperature compensation *
(Reference temp 25 °C) (OFF) None
(Lin) Linear characteristic 00.00 ... 19.99 %/K
(NLF) Natural waters to EN 27888
(nACL) Ultrapure water with NaCl traces (0...120°C)
(HCL) Ultrapure water with HCl traces (0...120 °C)
(nH3) Ultrapure water with NH
3
traces (0...120 °C)