Microphone, Transducer type dynamic moving coil, Polar pattern cardioid; noise rejecting – Clear-Com CC-260 (No longer available) User Manual
Page 2: Windscreen external pop filter, Nominal impedance 200 ohm balanced, Frequency response 70 to 18 khz, Front-to-back ratios > 15 db, General, Headset material abs, duracon®, and alloy, Finish grey and black matte non-reflective

Rev. B
2
© Clear-Com Intercom Systems 2000
Microphone
Transducer type
Dynamic moving coil
Polar pattern
Cardioid; noise rejecting
Windscreen
External pop filter
Nominal impedance
200 ohm balanced
Frequency response
70 to 18 kHz
Front-to-back ratios
> 15 dB
General
Headset material
ABS, Duracon®, and alloy
Finish
Grey and black matte non-reflective
Electrical isolation
Earphone to microphone < -116 dB at 1 kHz
Headset cable
Specially shielded and isolated straight cord
Length
5 ft. 6 in. (1.75 meter)
Termination
4-pin XLR female
Termination options
4-pin XLR male (monaural), 5- or 6-pin male or female
(binaural), or special connectors upon request
Boom rotation
300
o
Weight (without cord)
Single muff, 10 oz. (283g); double muff, 14.1 oz. (399g)
Furnished accessories
One pair ES-1 washable ear socks (double muff); 1 ES-1
ear sock (single muff)
Clear-Com Limited Warranty
This Clear-Com product is warranted to be free from defects in materials and workmanship for a period of one year
from the date of sale. The Clear-Com warranty does not cover any defect, malfunction, or failure caused beyond the
control of Clear-Com, including unreasonable or negligent operation, abuse, accident, failure to follow instructions in
the manual, defective or improper associated equipment, attempts at modification and repair not authorized by Clear-
Com, and shipping damage. Products with their serial numbers removed or defaced are not covered by this warranty.
This warranty is the sole and exclusive express warranty given with respect to Clear-Com products. It is the
responsibility of the user to determine before purchase that this product is suitable for the user's intended purpose.
Any and all implied warranties, including the implied warranty of merchantability are limited to the duration of this
express limited warranty. Neither Clear-Com nor the dealer who sells Clear-Com products is liable for incidental or
consequential damages of any kind.
Factory Service
Do not return any equipment to the factory without first obtaining a Return Authorization Number.
All equipment returned for repair must be accompanied by documentation stating the return address, telephone
number, date of purchase, and a description of the problem.
Send equipment to be repaired to: Customer Service Department, Clear-Com Intercom Systems, 4065 Hollis
Street, Emeryville, CA 94608-3505, Telephone: (510) 496-6666, Fax: (510) 496-6610; Web site:
www.clearcom.com.
Warranty Repairs
If in warranty, no charge will be made for the repairs. Equipment being returned for warranty repair must be sent
prepaid and will be returned prepaid.
Non-Warranty Repair
Equipment that is not under warranty must be sent prepaid to Clear-Com. If requested, an estimate of repair costs will
be issued prior to service. Once repair is approved and repair of equipment is completed, the equipment will be
shipped freight collect from the factory.
Note: All specifications subject to change without notice.
PN 810261