Clear-Com BS200 - Manual

ENGINEERING TECHNICAL BULLETIN
Bulletin No.: 2004-004 Revision: - Date: 11/24/04
Description: DX200 Configuration For Two Channel Operation Author: Nirosh P. Wijayaratne
Press IC button to talk to all beltpac users plus wired users connected through 4-Wire RJ45 or ClearCom/RTS interfaces
Press ISO button to talk to all beltpac users plus wired users connected through AUX IN/OUT interface.
2-Wire ClearCom or RTS
compatible Intercom
Interface
4-Wire Intercom Interface
(600Ω Balanced Input/Output)
4-Wire Intercom Interface via AUX
In/Out in ISO
+
mode
(600Ω Balanced Input/Output)
Turn On 2W/4W or 4W Only
depending on Intercom Interface Used.
Turn ON ISO+
to enable AUX
IN/OUT
Intercom
Group 1
Intercom
Group 2