Clear-Com HLI-FBS - Manual (Page 2)

1.4 Quick Setup with HLI-FBS Fiber
1. Connect Fiber cable from one HLI-FBS port on one Main Station to one HLI-FBS port on another Main
Station.
2. On each Main Station navigate to Menu > Networking > Linking > Link Station and select Enabled.
1.5 Quick Reference to Topologies
IP Network
HLI-ET2
HLI-ET2
HLI-FBS
HLI-FBS
HLI-ET2
1.6 Quick Reference to Cable Distances
Cable type Distance
Cat5 or Cat6 100 m
Multi Mode Fiber and
Clear-Com Multi Mode SFP 2 km
Single Mode Fiber and
Clear-Com Single Mode SFP 10 km
Copyright © 2013 HME Clear-Com Ltd. All rights reserved.
2 PN: 399G051 Rev: A 06/04/13