Clear-Com RM-704 - Manual (Page 9)

M S - 7 0 4 / R M - 7 0 4 F O U R - C H A N N E L M A I N / R E M O T E S T A T I O N S
1 - 3
The MS-704 is a four-channel main station that contains a no-fail system
power supply. The RM-704 is a four-channel remote station intended to be
powered from the intercom line.
The following is a list of features found in the MS-704 and RM-704 intercom
stations:
• MICROPROCESSOR CONTROL: Most aspects of station operation
are under microprocessor control.
• REMOVABLE ACCESS PANEL: A removable access panel allows
access to most controls and option DIP switches.
• INDIVIDUAL CHANNEL CONTROLS: Each channel has individual
talk, listen, and call pushbuttons for each channel.
• MOMENTARY/LATCHING TALK BUTTONS: The talk buttons
have a momentary and latching action depending on how the button is
used. The latching function can be defeated with DIP switches.
• INDIVIDUAL CHANNEL ADJUSTMENTS: Each channel has
individual listen level controls, channel null adjustments, and program
feed level controls.
• MULTIPLE PROGRAM INPUTS: Multiple program inputs are
provided for local station monitoring and program feed to intercom lines
for local talent cuing (IFB).
• INTERNAL IFB (IFB - Interrupt Foldback of program feeds):
Program can be fed to each channel and interrupted (IFB) when a talk
function is active or when a call signal is received on that channel. An
internal jumper determines whether the IFB function is talk- or call-signal
activated.
• LINK FUNCTION (MS-704): The MS-704 has a link function that
places all channels into a common party-line at the push of a single
button.
• ALL-TALK: An all-talk button allows instant access to all channels.
• ANNOUNCE FUNCTION: An announce button allows external paging.
A set of relay contacts is provided to control an external system.
• PROGRAM FEED OVER STAGE ANNOUNCE: An internal jumper
allows the main program feed to be fed to the stage announce output. The
program is automatically interrupted when the announce button is
pressed.
• MIC ON/OFF SWITCH: A separate mic on/off push-button allows
turning the microphone off without upsetting the setting of talk switches.
• REMOTE MIC KILL SWITCH (MS-704): Front-panel switch allows
you to turn off all latched talks on remote stations and beltpacks.
• EXTERNAL MIC ON/OFF INPUT: An external logic input allows the
mic on/off function to be switched remotely.