Fig. 1, Fig. 2 – CAME Gard12 User Manual

Page 14

Text mode
Original mode

- pag.

- english -

- While holding down key "CH" signal LED flashing (Fig.1), press the control key on the transmitter: the lights up of
LED sign the code stored (Fig.2).
IMPORTANT: Do not store the code on the circuit card unless the barrier is closed.

N.B.: If you wish to change the code on your transmitters in the future, simply repeat the procedure described
above.

CODE STORAGE

Fig. 1

9 10

Fig. 2

9 10

Flashing LED

Lit LED

AF radiofrequency board