Hydrotech Precision-PWS 8-M_8-MST OWNERS GUIDE - Manual (Page 4)

Introduction
Congratulations on the purchase of the most advanced water distiller in the
industry! When installed and maintained properly, your Precision Water Systems
water distiller will provide years of safe, trouble free service. It is important to
observe and follow the safety and maintenance instructions carefully. If you have
any questions or concerns regarding installation or operation of your water
distiller, please contact your dealer.
All 120 VAC Precision Water Systems Water Distillers are certified to cCSAus
Classes 2831-02 and 2831-82 under the Canadian and American Electrical
Code.
All Water distillers are factory tested with a high voltage ‘Dielectric Strength Test’
and ground fault test prior to shipping.
Precision Water Systems Water Distillers have been tested by EnviroTest
Laboratories which found the water distillation units to be very effective water
treatment systems capable of removing both harmful pathogens and toxic
chemicals from water. In their study all pathogens were eliminated and none
were found in the distilled water. The water distillation system also effectively
removed all of the soluble inorganic chemicals tested. Removal efficiencies of
99% or greater were achieved for almost every chemical tested.
All Precision Water Systems Water Distillers are operated and tested at the
factory and have produced distilled water to make sure all components are
functioning properly. All water distillers are wiped clean before shipping, but
there may be a water ring inside the boiling tank. There may also be an off-
colour line at the seams of the storage and boiler tank. This is caused by the TIG
welding process used during manufacturing. This is normal and is not a sign of a
problem. Follow all the Before Initial Water Distiller Operation procedures and
you will have pure water in no time.
Your Precision Water Systems Water Distiller must be installed according to any
Local, State or Provincial Regulations.
4