Hydrotech Precision-PWS 8-M_8-MST OWNERS GUIDE - Manual (Page 27)

Maintenance and Cleaning
Introduction
The purpose of purchasing a water distiller is so you will not have to drink
the unknown impurities in your drinking water. A water distiller effectively
removes the impurities and chemicals from your water and returns the taste of
pure water so that it is pleasing and healthy to drink for the entire family.
It is important to also keep the water distiller clean so that it can perform
properly and efficiently. Regular cleaning and maintenance will allow the water
distiller to continually provide pure water for a very long time.
NOTE: Regular Cleaning is much easier than trying to clean after a
prolonged period of time!
Regular Inspection and Cleaning of the Boiling Tank
1. To prevent a build up of scale and contaminants in the boiling tank, it is
recommended that the impurities from the boiling tank be drained after at
least every second distillation process. There may be an off colour line at
the seams of the boiler tank, this is caused by the TIG welding process
used during manufacturing. This is normal and is not a sign of any
concern.
MANUAL DRAIN FAUCET
STAINLESS STEEL DRAIN TUBE
Manual Drain Faucet Location Diagram
2. Refer to the Manual Drain Faucet Location Diagram above. The water
distiller boiling tank can be drained by opening the manual drain faucet
and draining into a suitable floor drain or container.
3. It is important to develop a regular maintenance routine.
27