Hydrotech 2510 Econominder Service Manual - Manual (Page 3)

MODEL 2510 & 2510 ECONOMINDER
job specification sheet
Page 3
• JOB NO. _________________________________________________________
• *MODEL NO. ______________________________________________________
• WATER TEST _____________________________________________________
• CAPACITY PER UNIT ____________ MAX. __________ PER REGENERATION
• MINERAL TANK SIZE DIA. _______ HEIGHT ________
• BRINE TANK SIZE & SALT SETTING PER REGENERATION:
_________________________________________________________________
• * 2510 CONTROL VALVE SPECIFICATIONS:
1. Timer Program Used
A. Separate Time Fill Cams
B. Rapid Rinse Cams
2. Type of Meter (3/4”)
A. *Std. range 125 to 2,100 gal. setting
B. *Ext. range 625 to 10,500 gal. setting
3. Meter Gallon Setting ___________ gal.
4. Regeneration Program Setting (see page 6)
A. Backwash ________________ min.
B. Brine & Slow Rinse _______________ min.
C. Rapid Rinse _________________ min.
D. Brine Tank Refill __________________ min.
5. Drain Line Flow Control _______________ gpm
6. Brine Refill Rate _______________ gpm
7. Injector Size ___________________
main
head