Hellwig Air 6307 - Manual (Page 7)

559-734-7451 800-367-5480 FAX 559-734-7460
11. Insert air spring assembly between
frame rail and axle as shown so that slots
in frame bracket are centered on rivets of
bump stop bracket on frame rail. Insert
carriage bolts into slots in axle bracket as
shown.
10. Attach frame bracket and
heat shield to air spring assem-
bly using the 3/8” flat head cap
screw. Orient frame bracket as
shown in photo so that the long
end points forward and the
washer is facing up. (Passenger
side shown—heat shield is not
installed on driver side)
Forward
Center slots on
rivets.
6307 ( R-6307 ) 12/06/07