Part c compressor installation – Hellwig Air 6290 User Manual
Page 16
559-734-7451 800-367-5480 FAX 559-734-7460
6090 ( R-6090)
03/09/07
Part C Compressor Installation
20. Prepare the compressor for mounting by HAND-TIGHTENING the air filter
into the port on the compressor. If necessary, adapters are provided with the com-
pressor to connect nylon hose from the tank to the compressor hose. Do not re-
move the braided hose or check valve from the compressor.
If the vehicle will be
operated in a manner where the compressor may draw in water, the air filter
should be remotely mounted with components included with compressor.
Air Filter
21. Attach 1/8” NPT bulkhead to relay bracket and fasten to mounting plate using
1/4” hardware.
Attach 1/4”x 1/8” MPT elbow to bulkhead. Attach relay to op-
posite end of bulkhead as shown. Use pipe sealant or Teflon tape (provided) on
all connections.
Attach compressor to mounting plate as shown using hardware
provided.
!/8” NPT Bulkhead
Relay
1/4” Tube—1/8” MPT Elbow