Hellwig Air 6015 - Manual (Page 4)

559-734-7451 800-367-5480 FAX 559-734-7460
6. Using a 13mm wrench, remove bolt
connecting brake tee to axle bracket and
save for use later. Bend tab flat with pli-
ers as shown in photo.
5
5. If you have an early model with the brake line tee mounted on the driver’s side
axle tube as shown in photo, proceed to step 6. If you have a later model with
the brake line tee mounted from the center section of the axle skip to step 11.
Early Model Late Model
7. Attach brake line spacer tab to axle bracket
using bolt removed in step 6. Place washer
under head of bolt to prevent bolt from bot-
toming on axle. Align tab as shown in photo
with new brake tee attachment point 1/2” in-
board of previous location to prevent brake
hose from rubbing on air spring. Do not
connect brake line tee to bracket at this time.
7
6
6012 ( R-6012 ) 12/06/06