GxT Ferret 63 DIAGNOSTIC ENGINE ANALYZER - Manual (Page 31)

VISUAL CHECKLIST
At the end of report printing there is the option to add
a list of visual inspection items. This is usually done to
help inform the car's owner of any defects that should
be repaired.
Use SELECT to choose one of the three printed line end-
ings. The initial setting for each line is “N/A” which means
Not Applicable, and it bypasses printing the item. “OK”,
“LOW”, and “BAD” are endings that print along with the
list item and indicate what inspection showed it to be.
REPORT IDENTIFICATION
The "ID FORM" option is a report identification footer.
This provides a standard method to neatly mark the test
record with the car, its odometer reading, and the date.
You can bypass the form printout by pressing any test
key.
The footer entries are then written on the report.
-29-
SELECT: VISUAL CHECKLIST
START : Print ID FORM