Grace Digital GDI-IRBM20 Business Music System - Manual (Page 19)

-
18 -
Stations which allow you to choose what you listen to
Some radio stations can provide a number of options associated with their station; for example, some stations enable you to listen to programs
that have already been broadcast. When you select a radio station that has this ability, the station does not start playing immediately, but
instead the display shows:
1. Turn the knob to choose or , then press the select knob inwards. IF you choose then the radio plays the current
output from this station as normal.
If you choose more screens are displayed and you can choose what you want to listen.
What is displayed will depend on the station you have chosen - the following steps are only a guide.
2. When you choose , the display shows the names of the programs. Turn the knob to choose the program you want, then press
the large knob inwards.
3. When you have chosen the program you want to listen to, either it will just start playing, or the display may show a list of days for you to
choose from - use the large knob to set the day the program was broadcast, and then press the ‘Select’ button.
4. After you have chosen the day, you may be able to choose the Start Time. Set the Start Time turning the knob and pressing it inwards to play
the station.
5. Program which enables you to choose the time also enable you to fast-forward and rewind to the part you want to listen to while the radio is
playing. The elapsed time is displayed. Using the Skip forward (P3) or Skip backward (P1). Skip forward or backward in 30 second intervals.
Setting the clock
1. Press the ‘Select’ knob inward. (Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.)
2. Turn the knob until the display shows
3. Press the ‘Select’ knob.
4. Turn the knob until the display shows
Register
< Clock Setup >
Sleep Timer
5. Turn the knob until the display says
< Live >
On Demand
Media Player
Alarm Clock
< Settings >