Burkert Type 7615 - Manual (Page 14)

14
Packaging,transport,Storage
9 MALFUNCTIONS
In the event of the device malfunctioning
→
Check the power supply.
→
Check the frequency.
→
Check the flow of the connection lines (counter pressure is too
high at the outlet or the underpressure at the inlet is too high).
10 ACCESSORIES
CAUTION!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable spare parts may cause
injuries and damage the device and the surrounding area.
▶ Use original accessories and original spare parts from Bürkert
only.
Auxiliary parts for micro dosing unit Type 7615
Part
Designation Order no.
4-pole connecting wire
with Molex connector
(500 mm long)
683 613
Fittings and hoses
see data sheet
Type TVU 003
11 PACKAGING, TRANSPORT,
STORAGE
NOTE!
Transport damage!
Inadequately protected devices may be damaged during
transportation.
• Protect the device against moisture and dirt in shock-resistant
packaging during transportation.
• Prevent the temperature from exceeding or dropping below the
permitted storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature 0 to 55°C.
12 DISPOSAL
→
Dispose of the device and packaging in an environmentally friendly
manner.
NOTE!
Damage to the environment caused by device components
contaminated with media.
▶ Observe applicable disposal and environmental regulations.
Note:
Observe the national waste disposal regulations.
english
Type 7615