Brooks Instrument SLA5800 Series - Manual (Page 16)

1-10
Brooks ® Digital MFC's & MFM's
Section 1 Introduction Installation and Operation Manual
X-TMF-SLA5800-MFC-eng
Part Number: 541B027AAG
April, 2013
Certifications:
EMC Directive 89/336/EEC:
per EN 61326
Hazardous Location Classification
Enclosure: Type 1/IP40
Ambient Temperature: 0°F > Tamb < 150°F (0°C > Tamb < 65°C)
United States and Canada
UL Recognized: E73889 Volume 3, Section 4
Class 1, Zone 2, AEx nA II T4
Per ANSI/ISA 12.12.02 - 2003 and ANSI/UL 60079-15
Ex nA II T4
Per CSA - E79 - 15
Europe - ATEX Directive 94/9/EC
KEMA 04ATEX1118X
Per EN 60079-15: 2003
The product shall be installed in a suitable enclosure providing a degree of
protection of at least IP54 according to EN60529, taking into account the
environmental conditions under which the equipment will be used.
Pressure Equipment Directive (97/23/EC):
See Table 1-1 for further pressure information
PC-based Support Tools
Brooks Instrument offers a variety of PC-based process control and service tools to meet the needs of our
customers. SmartDDE may be used with any unit supporting RS-485 in a multidrop configuration, thus allowing
users to control and monitor their Brooks devices. The Brooks Service Tool
TM (BST) may be used to monitor,
diagnose, tune and calibrate Brooks devices equipped with DeviceNet or F OUNDATION Fieldbus communications.
The Brooks Service Tool TM interfaces with Brooks products via a special service port.