Acer 100 Series - Manual (Page 71)

61
the infrared port is enabled.
• Make sure that both devices are IrDA-compliant.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g., HyperTerminal),
you need to set up your location:
1 Click on Start, Settings, Control Panel.
2 Double-click on Modems.
3 Click on Dialing Properties and begin setting up your location.
Refer to the Windows manual.
TM100-e.book Page 61 Monday, March 4, 2002 5:17 PM